HIMOINSA HRFW-60 S5 RENTAL Line

HRFW-60 T5 S5

Engine specifications 1,500
Rated power: 54 prp ; 54 standby
Manufacturer: FPT_IVECO
Model: F34.TEVP01
Engine type: Diesel four-stroke
Type of injection: Direct
Type of intake: Turbocharger
Cylinder, number and arrangement: 4 - L
Diameter x travel: 99 x 110
Total displacement: 3.4
Cooling system: liquid (water + 50% glycol)
Engine oil specifications: ACEA E6, ACEA E9, API CJ-4Compression ratio: 17:1
Fuel consumption standby mode: 13.9
Fuel consumption 100% PRP: 13.9
Fuel consumption 70% PRP: 9.8
Fuel consumption 50% PRP: 7.2
Oil consumption under full load: 0.1% of fuel consumption
Total amount of oil (including hoses, filter) 9.5
Total amount of coolant: 14.6
Regulator type mechanical
Air filter type dry
Diesel engines
Four-stroke engines
Water-cooled
Electric starting device 12V
Cooler with pressure fan
Filter separator (stand not visible)
Mechanical control
Dry air filter
Protection devices for hot parts
Protection devices for moving parts

Three-phase generator
Pole: 4
Connection type (standard): Star - series
Coupling type: S-3 11"1/2
Insulation protection class: Class H
Mechanical protection class (according to IEC-34-5): IP23
Control system: Self-excited, without brushes
Voltage regulator: A.V.R.(Electronic)
Type of bracket: Single bearing type
Clutch system: Flexible disc
Type of cover: Standard (vacuum soak)

Electrical system
Electric panel for control and circuit breaker, with gauges and Control center (depending on requirements and configuration)
Four-pole thermomagnetic circuit breaker
Adjustable differential protection (time and sensitivity), included as standard in M5 and AS5 panels with thermomagnetic circuit breaker
Battery charger (included in units with automatic panel)
Heating resistor (included as standard in units with automatic control panel)
Three-phase generator for charging batteries with earth connection
Installed starter battery/s (including cable and holder)
Electrical earth connection with connection provided for deep earth electrode (depth earth electrode not included in delivery)
Battery disconnect switch Optional

Soundproof version

• Steel housing

• Directory for radiator filling

• Pre-installation or wall niche to accommodate the quick-connect connections for transferring the fuel

• Leak-proof housing, designed to collect liquids (collection tray)

• Access for cleaning and draining the fuel tank

• Exhaust flap

• Vibration damper

• Fuel tank integrated into the housing

• Fuel level flow timer

• Aggregate box made of high-quality sheet metal

• High mechanical resilience

• Low noise level

• Sound insulation based on high-density volcanic rock wool

• Surface powder-coated with epoxy polyester

• Full service access (water, oil and filters without removing the top)

• Oil drain set for oil pan

• Filling the fuel tank from outside with safety key

• Emergency stop switch (double protection through emergency shutdown on the inside of the switch box + outside on the unit box)

• Mechanically machined for output of power cables

• Door with window for viewing the control panel, alarm messages and measured values

• Pressure locks

System data
EXHAUST SYSTEM
Maximum temperature exhaust gas operation: 760

Maximum permissible back pressure: 220 mbar
External diameter of the exhaust pipe: 90


REQUIRED AIR QUANTITY
Maximum air flow for combustion: 193.3
Air flow fan motor: 1
Air flow fan alternator: 0.216

STARTING SYSTEM
Starting power: 4.2
Starting power: 5.71
Auxiliary voltage: 12

FUEL SYSTEM
Fuel type: diesel
Fuel tank: 216

Dimensions
Length: 2,660
Height: 1,600
Width: 1,110
Maximum packaging volume: 4.72
Weight with fluids in radiator and oil pan: 1,690
Tank capacity: 216
Autonomy: 16 hours
Sound level: 62