Power generator HIMOINSA HFW-350 T5 IVECO

HFW-350 T5

Rated power: 300 prp ; 330 standby
Manufacturer: FPT_IVECO
Model: C13 TE 2A
Engine type: Diesel four-stroke
Type of injection: Direct
Type of intake: With turbocharger and aftercooling
Cylinders, number and arrangement: 6 - L
Diameter x Travel: 135 x 150
Total displacement: 12.9
Cooling system: liquid (water + 50% glycol)
Specifications Engine oil : ACEA E3 - E5
Compression ratio: 16.5: 1
Fuel consumption standby mode: 77.9
Fuel consumption 100% PRP: 70
Fuel consumption 80% PRP: 57.3
Fuel consumption 50% PRP: 38.8
Oil consumption under full load : 0.5% of fuel consumption
Total amount of oil (including hoses, filter) 35
Total amount of coolant: 67
Regulator type electronic
Air filter type dry
Inner diameter exhaust pipe outlet: 108
Diesel engines
Four-stroke
Water-cooled
Electric starter 24V
Cooler with pressure fan
Filter separator (stand not visible)
Electronic control
HWT indicator
NÖD indicator
Water level sensor cooler
Dry air filter
Hot parts guards
Moving parts guards

Pole: 4
Connection type (standard): Star - series
Coupling type: S-1 14"Insulation protection class: Class H
Mechanical protection class (according to IEC-34-5): IP23
Control system: self-excited, without brushesVoltage regulator: A.V.R.(Electronic)
Type of holder: Single bearing version
Clutch system: Flexible disc
Type of cover: Standard (vacuum impregnation)

Electrical control panel and circuit breaker, with measuring devices and control center (according to requirements and configuration)
Four-pole thermomagnetic circuit breaker
Battery disconnect switch
Adjustable differential protection (time and sensitivity), included as standard in the M5 and AS5 panels with thermomagnetic circuit breaker
Battery charger (included in units with automatic panel)
Heating resistor (included as standard in units with automatic control panel)
Alternator for charging batteries with earth connection
Installed starter battery(s) (including cable and Recording)
Electrical grounding connection with connection provided for deep earth electrode (depth earth electrode not included in delivery)

Steel housing
Oil drain set for oil pan
Versatile options when assembling large housings with metal tank
Vibration damper
Fuel tank
Fuel level flow timer
Emergency stop switch
Aggregate box made of high quality Sheet metal
High mechanical strength
Low noise level
Sound insulation based on high-density volcanic rock wool
Surface with Epoxy polyester powder coated (salt spray test of over 1000h)
Full maintenance access (water, oil and filters without removing the top)
Reinforced lifting hooks for lifting with crane
Hermetic housing (double wall function for collecting liquids)
Drainage closure tank
Drainage closure housing
Housing for the installation of a mobile kit is provided
High performance steel silencer with -35db(A)
Three-way valve for fuel transfer (available with 1/2" and 3/8 " connections) Optional
Fuel transfer pump Optional

Maximum temperature exhaust gas operation: 479
Flow rate exhaust gas operation: 0.518
Maximum permissible back pressure: 5
External diameter of exhaust pipe: 140
Heat dissipation through exhaust pipe: 648

Maximum air flow for combustion: 1495
Air flow fan motor: 6.8
Air flow fan alternator: 0.8

Starting power: 5.5
Starting power: 7.48
Recommended battery: 185
Auxiliary voltage: 24

Fuel type: Diesel
Fuel tank: 597
Other fuel tank values: 1,660

Length: 4,100
Height: 2,200
Width: 1.600
Maximum packaging volume: 14.43
Weight with liquids in radiator and oil pan: 4,191
Capacity tank: 597
Autonomy: 10 hours
Sound level: 68